Multi-Color Detectors
Multi-channel pyroelectric detectors (multi-color detectors) are mostly used for gas analysis. Aside from a reference filter, each measurement channel is tuned to a gas absorption line by integrating a bandpass filter. The gas concentration is calculated by applying the Beer-Lambert law. A reference channel improves the long-term stability of the measurement.
Laser Components offers a wide variety of standard bandpass filters for gas analysis (e.g., CO2, CO, NO2, SO2, and hydrocarbons) and reference purposes.
In our datasheet on filters you will find the corresponding filters. Additional filters are available upon request.
Current Mode Pyrodetectors - CM Mode
The same fundamental principles apply to both multi-channel and one-channel detectors in current mode. The detectors in current mode are particularly easy to integrate into systems; in fact, it is almost identical to Plug&Play integration.
The most compact detector is the three-channel version in a TO-39 housing!
The following product lines are available:
- Two-channel detectors with filters
L12 and L22 series - Three-channel detectors with filters
L13 and L23 series - Four-channel detectors with filters
L14 and L24 series
Fields of Application
Pyroelectric detectors can be used for:
- Medical gas analysis such as breath gas analysis
- Industrial gas analysis
- Flame detection
- Hydrogen flame detection
Our IR Detectors
Panchromatic, photoconductive and thermal detectors
InGaAs PIN Photodiodes
Modern InGaAs PIN photodiodes are panchromatic and convert broadband light to photocurrents in the Vis-NIR range. Concretely speaking, this means a sensitivity range from 500 nm to 1700 nm for regular InGaAs and – in increments – up to 2600 nm for extended InGaAs. Variations for data transmission are not panchromatic.
PbS and PbSe Detectors
PbS is a standard SWIR semiconductor detector (1 - 3.3 µm) whereas PbSe is used in the MWIR range (1 - 4.7 µm when uncooled; up to 5.2 µm when cooled). Our lead salt detectors are photoconductive; the detector resistance is reduced during illumination. The crystal structure is polycrystalline and is produced via chemical deposition.
Pyroelectric IR Detectors
A pyroelectric IR detector is a thermal detector in that it responds to the change in heat (IR) absorbed on its surface. Thermal detectors are polychromatic with a very wide spectral bandwidth.
The nature of the pyroelectric effect is that in a highly-ordered crystal (or ceramic), a temperature change in the element causes its atoms to move slightly out of position. This rearranges its electrical charge, which is measured in the electrodes on its surface.
The pyroelectric effect is found in many materials. The most commonly-used materials are deuterated lanthanum α alanine-doped triglycine sulfate (DLaTGS) and lithium tantalate (LTO).
What is Your Challenge?
Beyond Borders
LASER COMPONENTS Detector Group, Inc.
News & Events
from the infrared world
LASER COMPONENTS USA - Your competent partner for optical and optoelectronic components in the United States.
Welcome to LASER COMPONENTS USA, Inc., your expert for photonics components. Each product in our wide range of detectors, laser diodes, laser modules, optics, and more is worth every Dollar ($/USD). Our customized solutions cover all conceivable areas of application: from sensor technology to medical technology. You can reach us here:
116 South River Road
Building C
Bedford, NH 03110
USA
Phone: +1 603 821 7040
Email: info(at)
